Build log part 3: Resin printer electronics box

Great electronics need great casings, so I set out to make a first electronics box prototype for my 3d resin printer. Not only is it 3d printed, but in addition to the Monkeyprint electronics board it contains a Raspberry Pi 2. You see where this is going, don’t you… Continue reading Build log part 3: Resin printer electronics box

Build log part one: DLP 3d printer electronics

You want to build your own DLP 3d printer? You have come to the right place! Welcome to the start of a series of posts describing the steps towards building your own DLP 3d printer. We’ll start with the part that’s probably most intimidating to many people: the electronics.

Continue reading Build log part one: DLP 3d printer electronics

An all-in-one DLP 3d printer controller: Next steps

I have noticed that although the code is free, Monkeyprint is not yet in a state were it is really useful for anyone building a 3d DLP printer. In order to change this, I made plans for improving the software itself, but also sharing the hardware to provide an all-in-one DLP printer controller solution.

Continue reading An all-in-one DLP 3d printer controller: Next steps